Does anyone know the size of the nut on the crankshaft? My pulley broke and I have to replace it. The problem is that it is about 5 hours away so I can't measure it lol. Thanks in advance.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
It's 46mm IIRC, I think the socket I used was a 3/4" drive 1 15/16"
46mm = 1-13/16"
SK Hand Tool 34096 - 46mm Front Wheel Bearing Retainer Socket - 1/2 Drive Impact
Boise, you know there's an aftermarket crank pulley that's avail that's solid and much cheaper than an OEM... You buying used or new ?
If possible I would befriend the local Toyota folks. I have managed to build a pretty good relationship with the guys at the local Toyota and they have let me borrow a couple of the specialized tools that I have needed....including a 46mm socket for the crank pulley nut on my 60...
Where do you live, NeverLand ??
And I don't mean Michael Jackson' old ranch...