I'm looking for a set of fj60/62 cargo panels or a template so I can trace and build my own custom panel. If any one had something I would gladly buy them even if its just the press board I just want to copy them on some plywood. Thx
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I’d love this file as well if possiblue. Ive been looking to cut mine out of wood and a template would be super helpful.I have some DXF files that I made of the rear panels. You could send them to a printer and have them printed out on paper that you could use as a template. Would that help?
Here are my files. Use at your own peril,
Here are my files. Use at your own peril, but they worked well for my '84. I also show on the files where to cut the panels if you're using the 62 series rear 3-point seatbelts and factory trim cover, which is what I'm doing on my '84. I think I added a fastener in the trimmed version, so you might need to drill a hole in your inside steel for this (or delete that fastener).
Again, these files are for early trucks that do not have jack and tools stored in the side of the cargo area.
There are 2 versions, one with geometry to match the factory fasteners, and another with that geometry replaced with 3mm holes at the centre of the factory fasteners, so you can modify and use whatever fastener you prefer.
If you use these files and create new panels for your rig, please tag me so I can see what you did. It's always good to see different ideas on how to replace the tired, factory side panels. And if you find something that doesn't work with the files post up here. I'm happy to change them if something is amiss. Though as mentioned, they fit my '84 perfectly.
Hey man. That's super kind and generous. But not necessary. I've shared these files with lots of people, and I'm just happy to give something back to a great bunch of people here that are always willing to help. The only thing I ask is that if you use the files and make something cool, to post up, and tag me so I can see what you did. Keep us posted!OH man, this is huge. I've been hunting around for years. I'll download this and give it a go for my '62.
You got a venmo account? PM me your info so I can send you some beer money.
Calvin
Calvin, did you ever do these? We are doing mine Friday. Looking fort the tailgate file if anyone has it.OH man, this is huge. I've been hunting around for years. I'll download this and give it a go for my '62.
You got a venmo account? PM me your info so I can send you some beer money.
Calvin
So how would I download and print the 3 mm panel template? I'm from BC.....before computers. ThxI've updated my post above with a new file that has both variations of the panels in one file
1) first variation is a reproduction of the original panels
2) second variation is the same part, except factory clip geometry has been replaced with a 3mm hole at the centre so you can add different machinings if you're using a different fastener.
View attachment 3315586