For Sale FJ40 Icon style roll bar - Boston (1 Viewer)

Joined
Aug 9, 2007
Messages
6,904
Location
Reading, MA
 
 
Roll bar for sale. I added four OEM roll pads to the bar. This was designed to fit under a Bestop soft top. $150 + shipping.





 
Joined
Sep 29, 2010
Messages
1,835
Location
San Antonio, TX 78253
Will this fit under OEM softtop bows? Will this still allow the short jump seats to bs mounted in the rear? I am very interested. What's shipping run to 78253(san Antonio, tx). Thanks Boston
 
Joined
Aug 9, 2007
Messages
6,904
Location
Reading, MA
 
 
Here's a few pictures of it in my 71. It just bolts to the wheel wells so it will fit in your 74 or any other year. I won't be able to measure it until Friday. I had the long jump seats installed with it using the SOR brackets.



 

woytovich

I'm fake news
SILVER Star
Joined
Sep 2, 2003
Messages
12,497
Location
Metro NY
 
 
 
Who welded it up? What are the dimensions of the tube (diameter/thickness)

If shipping doesn't work out I might be interested...
 
Joined
Sep 29, 2010
Messages
1,835
Location
San Antonio, TX 78253
Oh up in dirtroit eh? My better half is from there fortunately she and her immediately family escaped.... However her mom still blows me s*** for driving foreign vehicles...
 

woytovich

I'm fake news
SILVER Star
Joined
Sep 2, 2003
Messages
12,497
Location
Metro NY
 
 
 
Still hoping to get this info:

Who welded it up? What are the dimensions of the tube (diameter/thickness)

Just in case shipping turns out to be a deal breaker for Sully...
 
Joined
Aug 9, 2007
Messages
6,904
Location
Reading, MA
 
 
Still hoping to get this info:

Who welded it up? What are the dimensions of the tube (diameter/thickness)

Just in case shipping turns out to be a deal breaker for Sully...
It measures 58" across, 36" tall and 28" front to back. It was welded by a certified welder at a machine shop. The OD is 2". I don't remember what the thickness is.
 

woytovich

I'm fake news
SILVER Star
Joined
Sep 2, 2003
Messages
12,497
Location
Metro NY
 
 
 
Still interested... we would need to find a way to get it down this way... Maybe via some Yankee Toys folks? Joe Mylie has been my go-to guy for this kinda thing. Thoughts?

Let's take this to email if you want...

Mark
mark@woytovich.com
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top Bottom