Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Fried my wiring harness trying to install a working speedo. Wanted to see if anyone might have a wiring harness for me to get my FJ40 back on the road.
View attachment 3160199
anyone?
Calling your shop tomorrow Mark, so you can help me with what I really need. Looks like the solid white wire on the back of my speedo is the one that really fried, the one next to it White with the blue line should probably be replaced too. Everything else looks to be ok....So you don't need a whole witing harness, just the part for the cluster? I have several of those.
2004As a preventative measure, you should buy and install some fusible link wire between the wire on the battery that is melting and the battery itself. The wire in question is bundled into the center of your main cowl loom, and if it melts, it WILL TAKE OUT YOUR WHOLE WIRING HARNESS! YOU WILL BE FAWKED! Fusible link is designed to melt before anything else.
The other suggestions posted here are all very good and useful. Ask lots of questions and be very careful.
Mark
Ok so full harness it is. Hope you have one for me!Nothing to discuss. I meant what I said in tech: you HAVE to pull the whole harness. If you want to call to remind me to look for one, that's great.
Those wires are not part of the cluster harness. The ARE the core of the main wiring loom.