FJ40 Brake line organization (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 30, 2015
Threads
93
Messages
315
Location
Santa Rosa Beach, FL
Guys, need help to best organize hard lines for 77 FJ40 USA. See pics. I just put the body on and everything is going together now. But the hard lines I got from cruiser corps need to be wrangled into position on the firewall. Can anyone recommend a good place to get some clamps to attach the lines to the firewall (similar to the OEM setup that accommodates 2 lines). The ones I’ve gotten to this point don’t have large enough holes to attach to firewall and I mangle the clamp trying to drill it out larger.

On another note, check out my purge tank setup. I used the delco canister and vacuum modulator valve , which I got from Redline landcruisers. I’m using another hardline on the firewall (previously a vacuum line) to run the purge line to the tank. I think its really clean. I mounted the purge tank on the bracket for the OEM washer fluid reservoir On driver side fender.

Will include a few pics of where I’m at, And some more of the status of the resto just because . Looking forward to having brakes so I can drive it one day soon.

Thanks in advance !

EE431AC2-CBCA-4DA6-B69B-EEEFAA2BCB46.jpeg


D8735EC3-C064-4E37-9D08-3C35D0E48430.jpeg


604DDBD0-9B8A-4304-ADEA-B8684139E8E3.jpeg


609B2A0F-836E-40CA-A1B3-D0D8BC7D07CE.jpeg


15A26635-2D19-4869-9CE1-ACBA13D7DAEB.jpeg
 
now ,,,,,,,,,

these are a new upcoming product release ,

i guess TEq cats out of the bag now i suppose ....... 🤔


but ........

- your tech photos BEG for these to have your build as there destiny :D💥


CCB2C736-96A9-4AB3-B600-EE63A7437B35.jpeg
 
I like these. Let me know where I can get a link to purchase some. I’ll figure out how many i need.


the new ones i just well , ...showed you above with the 3 and 2 lines rubber holders are NOT online store yet ,

Please PM me and let me know how many you need , and we can go from there

thanks

matt
 

Users who are viewing this thread

Back
Top Bottom