SOLD FJ40 3 Speed Parts (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 26, 2007
Threads
68
Messages
319
Location
Inland Empire, Southern California
Location
United States
Converted my 1971 FJ40 to 4 speed and selling the 3speed parts. Prefer local pickup. Transfer case (includes the 3 speed tranny) $300. Shifts and works very well. TC does not come with the cone and the housing that holds the speedo in place. However, the correct plastic speedo is included. The vacuum parts with the FD knob $40. The 3speed bell housing, flywheel, clutch release hub, flywheel cover, and clutch fork (one of the fork clamps is broken but drove like this for most of the time without an issue) $60. FJ40 stock rim $40. I will be selling together the 4 speed front and rear driveshafts for $400 l, but not pictured yet. I had new driveshafts made. I am open to trades as well.

9C942420-D3AB-4DB0-8684-0B115B587E11.jpeg


F878465F-8B39-4F68-8D53-67D5159A5EE6.jpeg


717A3E2E-7856-4588-AB59-9061093F8AF9.jpeg


BCF73757-0AA3-492E-89D7-D9245BF6A36F.jpeg


F39111AB-C5F6-4916-B210-BB8D0FE79A35.jpeg


C29DD1C1-A560-432B-8D6C-8F5762BBAABA.jpeg


A36F04C7-DF51-4B46-90C0-BE7B76D53D19.jpeg


13440BD8-6AB5-48E5-92A9-12722A15D279.jpeg


14169C62-9C58-40F3-B5E1-69357B762421.jpeg


12BB0549-D18E-4370-9E80-63ECC9BC3CD2.jpeg
 
I would be interested in the wheel Martin.
 
I would be interested in the

Mark, the tranny/tc that you rebuilt for me, I pulled from a right hand drive Aussie FJ55. My passenger can now shift for me. How much for a left hand drive 4speed shifter?
Martin,

Im sure we can work something out. That said, none of the floorshifters I run in my own rigs are stock; I’ve bent them all to suit my needs. Putting a 4speed into a bench seat 40 pretty much guarantees you’re going to have to modify the cane anyways. Smoke wrench and a bench vice ought to do it.😉

Im glad you asked on the forum. Others may benefit from the question as well.😊
 
Last edited:
I wanted to sell everything in the picture as a package. I’ll separate, but ask $60 for the 2-piece flywheel cover plus shipping or everything in that specific picture for same. However, shipping would be too expensive.
 
Sold the vacuum lines, wheel, and flywheel cover. All else still available.

I purchased two used FJ40 4 speed axles.I will not use them. Selling them together for $400. I decided to use the 3speed bolt patterns and rebuilt the existing 3speed axles.
 
Last edited:
Payment just sent for the wheel Martin! Thanks for the delivery! 😊

BTW, I haven’t gotten to look through the box of carb parts yet. Still sitting exactly where they were when you dropped off the trans/transfer. :rolleyes:
 

Users who are viewing this thread

Back
Top Bottom