FJ25 & Very early FJ40 Front Bumper “group buy” - Gauging Interest (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

AWESOM AWESOME AWESOME, THANK YOU THANK YOU THANK YOU!!!!
View attachment 2595164

And you get the main TRAIL TAILOR FJ25 bumper pic for being the first to post! Thanks!

J

FJ25 TAHOE.jpg
 
Last edited:
AWESOME! I've been wanting this for decades. Thank you!

Anyone need a brand new FJ40 front bumper? It comes with a brand new cardboard shipping box. 😁

IMG_20210224_172222913_HDR~2.jpg
 
Last edited:
I thought the 25 bumpers were body color too, along with the chassis. Kinda does look pewter actually. I swear I had read or seen that they were body color but maybe not. Toyota also liked to mess with us in these artist renditions sometimes.

FWIW the first photo is from the FJ28 brochure,
View attachment 2585810
View attachment 2585811
View attachment 2585812
View attachment 2585813
View attachment 2586356the

I’m late to the party and I don’t have that much 25 literature but what I do does suggest that the front bumpers were pewter.

565CA622-8793-4752-86C9-A02681219DAE.jpeg


AC9B2DD2-70A7-40EF-8B04-678D0747664E.jpeg


0E2C827D-B1E1-4F30-82D6-5BCF892ED48D.jpeg


2FF605FE-3484-48AF-97D8-F97B015485C6.jpeg


66CAEA5B-676C-4333-A841-2E5C2250CEAA.jpeg
 
I have the CAD files set for the brackets as well and once the dies are milled I'll get a few plasma cut and test bent/press stamped. If all is good I will send the files to the laser cutter for production.

Jason
How are the brackets looking Jason? Just thought I’d pop into this thread to make sure I wasn’t missing updates again. You made a lot of us 20 series owners very happy with these bumpers!!
 
How are the brackets looking Jason? Just thought I’d pop into this thread to make sure I wasn’t missing updates again. You made a lot of us 20 series owners very happy with these bumpers!!

Small bracket is finalized. Waiting on my buddy to finish milling the press plates for the triangle plate. Hope he gets it done this week. Then I can start sampling to make sure it is correct.
 
Small bracket is finalized. Waiting on my buddy to finish milling the press plates for the triangle plate. Hope he gets it done this week. Then I can start sampling to make sure it is correct.
I need a few sets too. Can’t wait. Great work!
 
Worked on the bumper all day. All welds and slight heat warp on the ends gone and ready for paint. Can't wait to get this all glossy and back on the LV. I know I've said it before but thank you for doing this Jason. It's an awesome addition to my build.

Edit: Can't wait for that rear LV bumper. :)


IMG_20210306_120432215.jpg


IMG_20210320_172818320~2.jpg


IMG_20210320_172804460_HDR.jpg
 
Last edited:
Small bracket is finalized. Waiting on my buddy to finish milling the press plates for the triangle plate. Hope he gets it done this week. Then I can start sampling to make sure it is correct.
Do you have any updates on the bumper brackets? I need 2 completed sets when you are finished.
 
I heard from Jason today about getting one of those bumpers. He said he needs to do 10 at a time to make it worth his time. So if anyone wants one let him know. I’m in for one.

Are you taking about the rear 45LV bumper?
 
Are you taking about the rear 45LV bumper?
 

Users who are viewing this thread

Back
Top Bottom