FIPG

Joined
Mar 13, 2003
Messages
5,791
Location
North Front Range, CO
FIPG, packing seal and RV sealant. Are you to wait till the sealant cures before you start motor or drive if other?
What is cure time for Toyota Seal Packing 102 and 1281?
Other RV says 24 hr cure time.
If you go to dealer or other shop do they wait the cure time before operating the vehicle? What about you, do you wait?
kurt
 

cruiserdan

SupportingVendor Emeritus
Moderator
Joined
Mar 27, 2003
Messages
25,563
Location
Land Cruiser Heritage Museum broom closet
FIPG 102 (00295-00103) FIPG 1281 (00295-01281)

"......Assemble parts within 15 minutes after application. Engine may be started in 1 to 2 hours. Hardens to become rubberlike in 15 to 16 hours."

00295-00103 $12.76 (black)

00295-01281 $20.00 (orange)


:beer:
 

Poser

Oh...Durka Durka Durka.
Supporting Vendor
Joined
Oct 1, 2003
Messages
20,464
Location
MN
Not thats its right, but I use black on oil pans and such and orange on tcases and axles.



That is Toyota's suggestion on the outside of the box this product is shipped in.


:meh:




:beer:
 

hward1

87 fj60 / 95 fjz80
Joined
Feb 10, 2011
Messages
1,020
Location
CA for little while
FIPG 102 (00295-00103) FIPG 1281 (00295-01281)

"......Assemble parts within 15 minutes after application. Engine may be started in 1 to 2 hours. Hardens to become rubberlike in 15 to 16 hours."

00295-00103 $12.76 (black)

00295-01281 $20.00 (orange)


:beer:

can i use black on the 3rd member by itself or does it have to be orange
do i torque down when i apply it or do i hand tight first then torque down in a hr
 
Last edited:

cruiserdan

SupportingVendor Emeritus
Moderator
Joined
Mar 27, 2003
Messages
25,563
Location
Land Cruiser Heritage Museum broom closet
can i use black on the 3rd member by itself or does it have to be orange
do i torque down when i apply it or do i hand tight first then torque down in a hr


Holy thread revival......:grinpimp:

Orange for gear assemblies. Torque during original assembly.
 

hward1

87 fj60 / 95 fjz80
Joined
Feb 10, 2011
Messages
1,020
Location
CA for little while
thanks - i was sent the wrong stuff from SC toyota -- what know i have the paper gasket also - can i use paper and go get some gray permatex and add it to both sides and be ok you think --
 

cruiserdan

SupportingVendor Emeritus
Moderator
Joined
Mar 27, 2003
Messages
25,563
Location
Land Cruiser Heritage Museum broom closet
I prefer Gasgacinch for paper gasket applications.

2-wps-59-9090.jpg
 

LINUS

Waiting for the Great Pumpkin
Joined
Mar 29, 2003
Messages
6,244
Location
PNW - WA

cruiserdan

SupportingVendor Emeritus
Moderator
Joined
Mar 27, 2003
Messages
25,563
Location
Land Cruiser Heritage Museum broom closet
Aren't you supposed to be out "teaching worms to swim"?

I prefer to teach NRA Highpower Service Rifle targets how to score X's and 10's. :grinpimp:
 

Users who are viewing this thread

Top Bottom