Hey folks, I am designing skid plated for my '94. They are belly style and one will cover from the transmission crossmember forward to the sway bar and the other from the crossmember back to the muffler.
I have them drawn up in 3D Autocad and a buddy who will be fabricating them. I am considering making and selling these in the future but for now, I need to get a prototype built.
Anyway, can anyone tell me the size, TPI and lenght of the stock crossmember bolts? I did some searching and maybe have some leads but...
There are 4 on each end boling through the frame and two in the middle. Also, there are various threaded holes in the frame that I was going to use so any help with those?
Here is a rough teaser:
I have them drawn up in 3D Autocad and a buddy who will be fabricating them. I am considering making and selling these in the future but for now, I need to get a prototype built.
Anyway, can anyone tell me the size, TPI and lenght of the stock crossmember bolts? I did some searching and maybe have some leads but...
There are 4 on each end boling through the frame and two in the middle. Also, there are various threaded holes in the frame that I was going to use so any help with those?
Here is a rough teaser: