exhaust ram horn cross-over

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Pic n' pull. Man those things are getting expensive if you find them in descent shape!
 
As was suggested in a previous post in the first link, contact Butch Baker(Texican), as he will know if you could get it at say…NAPA or something….


He is at the Roundup, so you will not likely get anything before next week sometime.



I do not see it as something that any decent exhaust fabricator could not replicate in pretty short order, if they were installing a complete system on your ride.


Good luck!


-Steve
 
thanks for info i found it at pirate walker 42087 ya i have a buddy at a brake shop but he is on holidays and i have no exhaust, don't want to run the motor with just ramhorns .over on pirate
i found a thread from Butch and there was talk of where the pipe is welded together it is restricted any body running this setup have any issues with the restricted flow?

i just want the cross-over so i can cruise over to the shop to finnish the rest of the exhaust .
 
I got mine at NAPA. Sorry I don't have a part # for it, but it's a common part.
HTH,

Dave
 
and noone is smashing this on rocks? And its not cooking the oil on the pan or filter? Just curious, because I was thinking I would have the exhaust shop bend one for me that wraps around the front of the motor on my new v8 install, like I had with my v6...

-Dustin
 
I told my friend at the local muffler shop what I wanted and he just giggled "I can make a better one from scratch and do it for less" so I let him. He was right. Did a great job.

As for damage, I agree with Poser, you'd about have to wipe your oil pan off the bottom of the rig...
 
Back
Top Bottom