Wanted Exhaust Manifolds 1FZ-fe ( 1994 with egr ) (1 Viewer)

[swamp-thing]

Location

United States

Hey all, finding one more thing I need to swap out on this new-to-me 1994.
Now I need the Exhaust manifolds ( cast iron octopus with only 6 legs looking things ) with the ports open and studs in tact for the EGR tubing.
Mine is a 1994, I think maybe 93 or 94 might be just fine.....after that those ports are sealed up.


I've parted many 80 series cruisers over the years and have sold these manifolds multiple times over -- I really should have kept a rainy day set!!
Let that be a lesson to you all to hoard parts indefinitely.

Tia

 

[dr_dobro]

@swamp-thing don’t know if the 95-97 are different, I have these pair of a 96 Lexus

 

[swamp-thing]

hey thanks for responding to the post — what i actually need are the cast iron clunkers that bolt to the block and reside just under the heat shields you have pictured above. And as far as i can tell the 95+ ones do not have the ports open for the egr tubing….so they have to be the early 1fz edition 93-94

 

[dr_dobro]

hey thanks for responding to the post — what i actually need are the cast iron clunkers that bolt to the block and reside just under the heat shields you have pictured above. And as far as i can tell the 95+ ones do not have the ports open for the egr tubing….so they have to be the early 1fz edition 93-94

Totally not reading your post. My bad !
I sold a few of those years back too.
Sure someone will chime in

 

[ginericLC]

I have a set with the PAIR Valve still attached. $150 plus actual shipping.