Electric hub removal (1 Viewer)

[RHD Toyota's]

I've pulled the 6 torx studs out, but the four studs remain.

Anyone know how to get these out, I don't understand how these studs work.

Trying to install my hub conversions, please help if you can

 

[zcruz]

The six torx bolts only hold the outter cover on. It's about 1/2" thick. You might have to give it a tap. then once that cover is off you need to removed the 4 stud nuts. Then there are still cone washers that you need to remove. They are sticky so you need to tap the end of the studs with a brass drift or something hard but won't damage the threads. they will pop out when loose. Pull the snap ring on the end of the shaft then remove.

 

[RHD Toyota's]

so just give those last four studs a good smack, and there out hey.

I don't think I have to worry about those threads, I'm fairly sure I don't need them as I will be running Warn hubs and RADD cruisers hub adapter.