Door Sill Scuff Plate Question - Post Facelift 200

[prasta]

Wondering if the hive mind has replaced or repaired their door sill scuff plates? (pictured)

I have a post-facelift, with the illuminated LC logos in the panel 67914-60171, wondering if the pre-facelift versions will fit. Why you ask? Well it's 92 dollars vs 274.

Some water got into the leds on both sides, and i'd just assume replace the with the non-illuminated for lower maintenance

 

[bloc]

My gut says they’ll fit without problem. I can’t research the surrounding parts for continuity for a couple days, but you could do so. If the lower B pillar trim and front occupant kick panel didn’t change part numbers between 15 & 16 you should be good to go.

 

[prasta]

My gut says they’ll fit without problem. I can’t research the surrounding parts for continuity for a couple days, but you could do so. If the lower B pillar trim and front occupant kick panel didn’t change part numbers between 15 & 16 you should be good to go.

3 minute response time; that's gotta be some sort of record! Will investigate, great suggestion.

 

[prasta]

Closing the loop. The 1/3rd of the cost replacements came in, and they went into the truck no problem! They don't look as "classy" as the brushed aluminum with the fancy LED inlay, but I'm thrilled all the same. Thanks to @bloc for his insight in how to assess fit. I'll post a picture when I get back outside.

 

[flyingtfeist]

Question on the part numbers for the illuminated scuff plates…I see the part number for the LH Drivers side door. I’m having trouble tracking down the numbers for the RH front, as well as the LH and RH rear with the illuminated scuff plates. Trying to see if they’re available anywhere or if I should delete as the OP did.