Doing rear axles and rotor wont come off

[RFB]

My passenger side rotor does not want to come off, Ive wiggled it and it moves but wont slide off. E brake ISNT on. any ideas? I dont want to damage rotor. and I know I can leave it on and still do axle But I want to pull it now before it becomes totally immovable.

 

[Necota]

My passenger side rotor does not want to come off, Ive wiggled it and it moves but wont slide off. E brake ISNT on. any ideas? I dont want to damage rotor. and I know I can leave it on and still do axle But I want to pull it now before it becomes totally immovable.

Did you try the hammer whack?

 

[RFB]

Did you try the hammer whack?

oh yes I have side to side penatrating oil etc.

 

[jonheld]

You have to crank in the e-brake pads through the slot in the rotor.

 

[RFB]

You have to crank in the e-brake pads through the slot in the rotor.

clockwise or counter? I knew that was the answer just couldnt figure it out. TY TY T Y

 

[jonheld]

clockwise or counter? I knew that was the answer just couldnt figure it out. TY TY T Y

Slot in the rotor on the bottom.
Insert flatblade screwdriver until it makes contact with the star wheel. I honestly can't remember which way. I think up is loose and down is tight. You'll figure it out pretty quickly.

 

[cjmoon]

Slot in the rotor on the bottom.
Insert flatblade screwdriver until it makes contact with the star wheel. I honestly can't remember which way. I think up is loose and down is tight. You'll figure it out pretty quickly.

Direction could change if the separator/adjuster is put in backwards still functions just opposite adjustment.

Crank on it if it gets tight and locks up rotor go the other direction.