Disc Brake Conversion Question (1 Viewer)

[aregan87]

Newby here...
I am in the midst of the disc conversion and am running into an issue with removing the hub housing. It looks like there is a C Clip retaining, but it isn't a C Clip(i've put a 90 degree pick behind it and it won't move).

I removed the small hex bolts also.

Any and all ideas would be appreciated.

 

[pb4ugo]

Remove or loosen the set screws with an allen wrench to unlock the spanner nut, then loosen the round spanner nut. Behind that you'll find a washer then another nut to remove. Then you can remove the hub.

 

[aregan87]

Remove or loosen the set screws with an allen wrench to unlock the spanner nut, then loosen the round spanner nut. Behind that you'll find a washer then another nut to remove. Then you can remove the hub.

Thanks! I had already removed the set screws, but couldn't get the nut moving. Thank you for letting me know it is a Spanner nut. Googled how to remove that without a special tool and it came right off!