Newby here...
I am in the midst of the disc conversion and am running into an issue with removing the hub housing. It looks like there is a C Clip retaining, but it isn't a C Clip(i've put a 90 degree pick behind it and it won't move).
I removed the small hex bolts also.
Any and all ideas would be appreciated.
I am in the midst of the disc conversion and am running into an issue with removing the hub housing. It looks like there is a C Clip retaining, but it isn't a C Clip(i've put a 90 degree pick behind it and it won't move).
I removed the small hex bolts also.
Any and all ideas would be appreciated.