Differential Breathers Questions (1 Viewer)

[Nemo]

I have a feeling I may get the "Searh the Forum" attack But I performed a search and can't find the information I was looking for. I am trying to save some time from having to crawl under the truck to figure out the Diameter of the Hose needed so I can extend my breathers. Also, is there anything to be aware of by performing this? Also, in one of the threads someone mentioned adding a Oil Breather filter ma thingy? What is that?

 

[clownmidget]

(http://george4wd.taskled.com/breather.html)

 

[RavenTai]

1/4" ID hose / OD line.

any filter that you can put on the end of the breather hose/line will do, I used an in line fuel filter.


and yes search.

 

[IdahoDoug]

Ditto Raven's post....

 

[OGBeno]

Lawn mower fuel filters are about $2.50 at Napa...get a few and clamp'em on...

 

[alaskacruiser]

Mods- please add george's link to the FAQ- this information is VERY useful.

 

[reffug]

Mods- please add george's link to the FAQ- this information is VERY useful.

Done.

 

[NorCalSam]

When we got the cruiser I was missing the control wire for the front locker. So we ordered one up and I installed it myself. I'm going to take a look at this again. I thought for sure that my locker control wires had extended breathers on them. But I've been wrong before.

 

[WES1977]

Toyota makes breathers that are made for 1/4" hose. https://forum.ih8mud.com/showthread.php?t=65140