Differential Breathers Questions

Joined
Sep 17, 2005
Messages
248
Location
Denver, CO
 
 
 
I have a feeling I may get the "Searh the Forum" attack :confused: But I performed a search and can't find the information I was looking for. I am trying to save some time from having to crawl under the truck to figure out the Diameter of the Hose needed so I can extend my breathers. Also, is there anything to be aware of by performing this? Also, in one of the threads someone mentioned adding a Oil Breather filter ma thingy? What is that? :flipoff2:
 
Joined
Nov 16, 2003
Messages
6,045
Location
Dixie co. Florida
 
1/4" ID hose / OD line.

any filter that you can put on the end of the breather hose/line will do, I used an in line fuel filter.


and yes search.
 
Joined
Aug 25, 2005
Messages
695
Location
Grass Valley CA
When we got the cruiser I was missing the control wire for the front locker. So we ordered one up and I installed it myself. I'm going to take a look at this again. I thought for sure that my locker control wires had extended breathers on them. But I've been wrong before.
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top Bottom