Parting Out Denver Colorado: FJ40, 55, 60, 62, 80 Parts (1 Viewer)

Joined
Jul 28, 2020
Messages
31
Location
kansas ciry
Good morning, called and left VM and TExt to connect on parts, please let me know if they are still available and if you have time to discuss, looking to buy multiple items you likely have. thanks
 
Joined
Jul 28, 2020
Messages
31
Location
kansas ciry
GOod morning, mine is '80 anything to fit that? windshield on mine is good. looking maybe for frame, tub, doors, air intake (cowbell) etc :) thanks!
 
Joined
Oct 14, 2020
Messages
13
Location
California
So one of my dads old friends who owned Aspen Total Automotive and PITCO off-road previously in Aspen Colorado just sold his shop after 40 years in business. Even though he worked on everything his main focus and passion was land cruisers. As a result he has acquired a ton of cruisers and parts is trying to get rid of a lot of it as his house and storage lot is just filled with cruiser stuff. I will try to list all the main things that come to mind that he has but if you need a part especially for 40s and 60s. (Odds are he probably has it) just ask and I’m happy to check.

Here are the main parts that come to mind

Cars (preferably like to sell as wholes if possible) and will sell cheap as he just needs them gone
88 FJ62: Rusted body but runs, 280k, motor and trans good, interior decent, body is probably a lost cause
96 Cruiser: 190k, ran when parked, unlocked axels, front end damage (will need to be towed), probably only good for drivetrain
85 FJ60: maybe savable body, 2F motor with lower mileage (have to double check exact)
FJ55: Has a small block Chevy and it runs good, body is rusted but he has he front fenders and stuff to clean it up

I will get pictures of all these rigs tomorrow they are sitting in the storage lot and as a result they have sorta just been sitting for a while. He does however need them all gone by August so he wants to sell them and he will sell them cheap


Parts:
This guy has to have more 40 and 60 series parts then most other people. Attached below are two of his tents full of 40 and 60 series stuff and a little 80 series stuff as well. This is just some of much more stuff he has. I’ll name a few of the big stuff but again just ask if you need something specific.

40 and 60 series transmission and t cases from all different years
instrument clusters
hubs
Carbs
Hub caps
Tie rod ends
Intake manifolds
Cam shafts
Gas tanks
Seats
Wiring
Embelms
Steering wheels
Window Regulators
Leaf Springs
Various Control modules


This is just scratching the surface of what this guy has. If you need anything else just ask. The plan is to ship stuff from Aspen for out of towners and for people who live on the front range I will be making trips once every two weeks up to grab stuff and bring it down to the Colorado Springs area. If you are interested in a part or car just shoot an offer and we will see if we can make it work. For a quicker response feel free to text me at 7193372666.

Thanks!

View attachment 2318462View attachment 2318463View attachment 2318464View attachment 2318465View attachment 2318466
Looking for a 72 f engine intake manifold
 
Joined
Oct 14, 2020
Messages
13
Location
California
Hey all, I appreciate all the messages and PMs from you. I wanna apologize for the slow response and lack of communication I have sorta of been overwhelmed with this so far. John (the guy who owns all of this stuff) was totally on board for me to post all the stuff and start getting a list of what people want. However, due to having the stuff for over 40 years I am learning that he's going to have a little bit of a harder time letting all the stuff goes and I originally thought. I think it's understandable however it's making the selling process a lot harder than I thought it would be yesterday. I tried to respond to all your PMs and texts (I know I need to clean my Mud inbox I am sorry) and all the stuff that you guys are interested in I am making a list and sending it to John. I drove back to Colorado Springs today as I still have a job down here. I am going to send him a list and then he will go in and see if he has it and try to pull it and see how much he wants for it. I think this will be a week or two process. I will be going up in two weeks also to help him out more and hopefully at that point be able to grab some parts and bring it back to people on the front range and out oft owners we can discuss shipping at that point. This is just going to be more of a process then I originally thought and I hope y'all can help bear with me as we try to figure this out.

Also, some people have asked if they can just come up and go through his stuff. He does seem on board with that, but again I think he wants a little bit more time to go through and keep what he wants.I think this will be a week or two process. I will try to do my best at keeping in communication with you all and hopefully be able to get most of the stuff y'all are looking for in your hands. Again I so appreciate all of the support so far.

Thanks!
Andrew
Might you have a SM420 transmission?
 
Joined
Sep 20, 2020
Messages
35
Location
94602
I'm looking for door gaskets and felts for fj40 hard doors. Also rubber where the hardtop touches the tub..
Thanks!
 
Joined
Oct 16, 2016
Messages
108
Location
Trinidad
hey andrew i am in need of

complete right side front knuckle with flange ect. also need birfield
had a bearing failure which screwed everything

cost for roof rack complete including bolts

cost for right side rear bumper side cover with chrome strip

shipped to 33162
 
Joined
Aug 26, 2009
Messages
11,701
Location
down in a hole.
Hello. I need an fj62 steering intermediate shaft with joints(base of column to gearbox input) and an fj80 drag link with pitman arm end. Need shipping to Fresno cali. Lmk. Thanks
 

Users who are viewing this thread

Top Bottom