Parting Out Denver Colorado: FJ40, 55, 60, 62, 80 Parts

Joined
Jan 16, 2020
Messages
1
Location
broomfield colorado
So one of my dads old friends who owned Aspen Total Automotive and PITCO off-road previously in Aspen Colorado just sold his shop after 40 years in business. Even though he worked on everything his main focus and passion was land cruisers. As a result he has acquired a ton of cruisers and parts is trying to get rid of a lot of it as his house and storage lot is just filled with cruiser stuff. I will try to list all the main things that come to mind that he has but if you need a part especially for 40s and 60s. (Odds are he probably has it) just ask and I’m happy to check.

Here are the main parts that come to mind

Cars (preferably like to sell as wholes if possible) and will sell cheap as he just needs them gone
88 FJ62: Rusted body but runs, 280k, motor and trans good, interior decent, body is probably a lost cause
96 Cruiser: 190k, ran when parked, unlocked axels, front end damage (will need to be towed), probably only good for drivetrain
85 FJ60: maybe savable body, 2F motor with lower mileage (have to double check exact)
FJ55: Has a small block Chevy and it runs good, body is rusted but he has he front fenders and stuff to clean it up

I will get pictures of all these rigs tomorrow they are sitting in the storage lot and as a result they have sorta just been sitting for a while. He does however need them all gone by August so he wants to sell them and he will sell them cheap


Parts:
This guy has to have more 40 and 60 series parts then most other people. Attached below are two of his tents full of 40 and 60 series stuff and a little 80 series stuff as well. This is just some of much more stuff he has. I’ll name a few of the big stuff but again just ask if you need something specific.

40 and 60 series transmission and t cases from all different years
instrument clusters
hubs
Carbs
Hub caps
Tie rod ends
Intake manifolds
Cam shafts
Gas tanks
Seats
Wiring
Embelms
Steering wheels
Window Regulators
Leaf Springs
Various Control modules


This is just scratching the surface of what this guy has. If you need anything else just ask. The plan is to ship stuff from Aspen for out of towners and for people who live on the front range I will be making trips once every two weeks up to grab stuff and bring it down to the Colorado Springs area. If you are interested in a part or car just shoot an offer and we will see if we can make it work. For a quicker response feel free to text me at 7193372666.

Thanks!

View attachment 2318462View attachment 2318463View attachment 2318464View attachment 2318465View attachment 2318466
Hello! My name is Hudson and I live here in Colorado, I am currently looking for a window hinge for the drivers side! If you think your dads friend has one I would be willing to drive up there and buy it off you and maybe look around at the other parts!
 

Rusto

SILVER Star
Joined
Sep 19, 2015
Messages
610
Location
Durango, CO
My god, what a frenzy.

I want to thank @Andrew Bluemel first and foremost for thinking of MUD when this gold mine was uncovered. I'm more excited about this than when that treasure was finally found somewhere in Colorado last week. Dang. And thanks to the owner of all the parts for being such a huge Cruiserhead and let him know that while it's understandably difficult to get rid of such cool stuff that's been a part of his passion for so long, his passion will be passed along through his parts to others that share it. And it will help keep more of these awesome trucks on the road. So cheers to the both of you!

With that being said, shall I enter the fray :)

Front door square speaker covers in good shape, dark grey/black for '87 60
FJ60 or FJ80 Steering box.
Air intake hose in good shape for '87 60
Headlight washer reservoir for '87 60
AC Dash Bezel Grey for '87 60

I'm sure i need more, but that's what is top of mind at this point. All shipped to 81301 (Durango)

Thanks again!
Russell
 
Joined
Oct 27, 2019
Messages
43
Location
Albuquerque, NM
Hello From Albuquerque.
Looking for Fj40 seats 76 style front/rear
4 speed transmission to replace my 3 speed
rt side tire carrier
Thanks,Rich
 

Akloml

SILVER Star
Joined
Jun 18, 2018
Messages
111
Location
Buffalo new york
So one of my dads old friends who owned Aspen Total Automotive and PITCO off-road previously in Aspen Colorado just sold his shop after 40 years in business. Even though he worked on everything his main focus and passion was land cruisers. As a result he has acquired a ton of cruisers and parts is trying to get rid of a lot of it as his house and storage lot is just filled with cruiser stuff. I will try to list all the main things that come to mind that he has but if you need a part especially for 40s and 60s. (Odds are he probably has it) just ask and I’m happy to check.

Here are the main parts that come to mind

Cars (preferably like to sell as wholes if possible) and will sell cheap as he just needs them gone
88 FJ62: Rusted body but runs, 280k, motor and trans good, interior decent, body is probably a lost cause
96 Cruiser: 190k, ran when parked, unlocked axels, front end damage (will need to be towed), probably only good for drivetrain
85 FJ60: maybe savable body, 2F motor with lower mileage (have to double check exact)
FJ55: Has a small block Chevy and it runs good, body is rusted but he has he front fenders and stuff to clean it up

I will get pictures of all these rigs tomorrow they are sitting in the storage lot and as a result they have sorta just been sitting for a while. He does however need them all gone by August so he wants to sell them and he will sell them cheap


Parts:
This guy has to have more 40 and 60 series parts then most other people. Attached below are two of his tents full of 40 and 60 series stuff and a little 80 series stuff as well. This is just some of much more stuff he has. I’ll name a few of the big stuff but again just ask if you need something specific.

40 and 60 series transmission and t cases from all different years
instrument clusters
hubs
Carbs
Hub caps
Tie rod ends
Intake manifolds
Cam shafts
Gas tanks
Seats
Wiring
Embelms
Steering wheels
Window Regulators
Leaf Springs
Various Control modules


This is just scratching the surface of what this guy has. If you need anything else just ask. The plan is to ship stuff from Aspen for out of towners and for people who live on the front range I will be making trips once every two weeks up to grab stuff and bring it down to the Colorado Springs area. If you are interested in a part or car just shoot an offer and we will see if we can make it work. For a quicker response feel free to text me at 7193372666.

Thanks!

View attachment 2318462View attachment 2318463View attachment 2318464View attachment 2318465View attachment 2318466
Morning, Thanks for doing this for your buddy. I'm kinda doing the same thing just not as big as your undertaking. My list is small. Looking for the older style two wires hose clamps, all sizes. The next is head rests for my build, light brown, tan, any light colored ones but i will not be picky. The last is dash lights. I did see most in pics so it just comes down to money. Thanks again troy
 
Joined
Apr 24, 2020
Messages
12
Location
Folsom
I am looking for a passenger side and driver side bracket that joins all three pieces of the roll bar together. If you come across it during your inventory (OEM Fj40 roll bar)..thx
 
Joined
Mar 26, 2018
Messages
21
Location
Littleton, Colorado
Hello:
I am looking for an exhaust down pipe or flanged exhaust stub for a 1984 FJ60 2F engine with a 3-bolt flange (right side of photo) or a 1971 FJ40 exhaust manifold (left side of photo). Thanks!

IMG_0476.jpg
 

4Cruisers

Supporting Vendor
SILVER Star
Joined
Apr 2, 2015
Messages
5,901
 
Any '75 or '76 vacuum retard distributors (19100-61020) or '77 vacuum advance distributors (19100-61021) that can be refurbished? I don't need functioning vacuum retard units on the '75 or '76 distributors or vacuum advance units on the '77 distributors. I could also use a '78 or later 2F distributor for parts.
 
Top Bottom