SOLD Dallas-80 Series Sliders (1 Viewer)

[mxtaco48]

Location

United States

Selling these Cruisin Off-road bolt on Sliders off an HDJ81 but they probably work with all 80 series unless someone can correct me on that. Located in Dallas. I work in Houston and could bring it him with me the next time I’m headed that way. Asking $600. No dents or bends in the metal. They could use some new paint.

 

[Manny]

Interested, sending a PM

 

[mxtaco48]

Replied

 

[mxtaco48]

 

[mxtaco48]

The pics above show how it’s mounted to the frame plus the gusseting. The constructions seems extremely strong. There’s zero give. There doesn’t appear to be any rock rash on the underside of the sliders.

 

[txfzj80]

Would I have to drill holes into the frame to install these? Thanks

 

[joxeale]

PM sent

 

[mxtaco48]

So after looking at the sliders they’ll fit an HDJ81 fine but for an American 80 you’ll need to cut off the right front bracket and fab up something like below or similar. There’s a lot of different designs to account for the cats depending on you Year.

 

[mxtaco48]

Would I have to drill holes into the frame to install these? Thanks

No but see my post above

 

[mxtaco48]

PM sent

Please see my post above

 

[mxtaco48]

I’d replace the bolts that are on it with grade 8. They are a bit rusty.

 

[mxtaco48]

So after looking at the sliders they’ll fit an HDJ81 fine but for an American 80 you’ll need to cut off the right front bracket and fab up something like below or similar. There’s a lot of different designs to account for the cats depending on you Year.

View attachment 3256374

View attachment 3256375

This is the bracket that would need to be cut at the two spots I marked. You can reuse the mounting plate on the frame side.

 

[joxeale]

You mean to allow room for the 95-97 dual cats?

 

[mxtaco48]

You mean to allow room for the 95-97 dual cats?

From what I read or saw on some sites, there’s an exhaust or cat in the same spot which creates the same issue regardless of year

 

[mxtaco48]