- Thread starter
- #21
should be picking up some tube tomorrow then hopefully working on some of it this weekend.
Builds cuttin up the lx (1 Viewer)
- Thread starter wv_lx450
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #22
got the rear bumper tacked on this eve
- Thread starter
- #23
couple more
You guys got the garage man! Nice couch!
What kind of bump stop set up is that in the rear coils?
- Thread starter
- #27
Thanks! yes, its a great garage. even has central heat/ac, bathroom and cable so i can pretty much live out there.
- Thread starter
- #28
just the stock upper rubber bumpstop with a 3in tall tube (capped off) welded on the spring perch. centers the spring on the axle and acts as a bump stop extension.
carnage! I'm not that strong. You the man.
- Thread starter
- #30
did some more work this weekend not finished yet but gettin close
- Thread starter
- #31
.....
- Thread starter
- #32
also got the tool box, air tank, and compressor bolted down today. the tank used to be in the tool box but i needed the space in the tool box for obvious reasons
- Thread starter
- #34
easiest way is to take the bottom bolt off the shock and then lift the truck. the axle will drop enough to get the spring out.
A bit off subject. But I noticed the one tons. Did you keep the original suspension set up and just weld everything up to the tons. That's what it looks like.
- Thread starter
- #36
yes. i could take the tons out and put a set of stock axles back under it without changing anything. the only thing different is the front 3-link but the front lower control arms are mounted to the stock control arm location.
Where is the gas tank going?
- Thread starter
- #38
didnt have to move it, its in front of the rear axle.
Sweet.
Do you have any pics taken before the one in your first post?
How did you cut the top off?
Do you have any pics taken before the one in your first post?
How did you cut the top off?
- Thread starter
- #40
Yeah. Ill get a before pic up this afternoon. I cut it with a sawzall.
