I have a 69' fj 40 I have done a SOA some years ago . and C n T the Front axel . which hasn't seem rite . I haved experience the death wobble . so i added some 4 degree shims and replaced the 2 leaf springs that i took out .so now i am redoing my mistakes . I am also going to flip the rear leafs to gain more wheel base . I am replaceing the front spring perches with some from RuffStuff. I am planning on doing the cut n turn on the rig after i set the driveline angle. I am also welding on axel trusses front and rear from Bullistic Fabrication. I assume I should set the knuckles at 4 to 6 degrees ,I have read that one person set his at zero. If anyone has more input i would appreciated it Dennis
