Could someone with a 1HZ do me a favor?

[The Eradicator]

I am trying to find the part number for the vehicle side electrical connector for the injection pump wiring. The connection is located on the back of the pump. There should be a 5 digit number on the female plug - that is the last 5 of the part number. If someone could find that number on theirs, I'd really appreciate it. Here is a picture of my male connector.

Thanks

 

[OGBeno]

 

[The Eradicator]

View attachment 1989439

View attachment 1989440

Thanks, Onur. I found those numbers, but the only place that shows them as available is Amayama. I suspect I'll be getting an email from them shortly saying that they don't actually have any. If that's the case, it looks like they cross to Yazaki 7283-1238-40. The trick will be finding a supplier that will sell me a single part.

 

[OGBeno]

I’d contact David Stedman.

 

[roscoFJ73]

The 3L plug looks the same/similar

 

[Loober]

Or what you could do is a buy a set of male/female connectors of a different style more readily available and go that route. I've been using these, which are of similar quality to OEM and may even use the same pins, meaning you could push out the wires out of the one you have now and stab them into the new one, so you wouldn't have to re-splice.

The place for all your motorcycle electric needs.

We make and sell only the highest quality products.

www.easternbeaver.com

 

[OGBeno]

Or what you could do is a buy a set of male/female connectors of a different style more readily available and go that route. I've been using these, which are of similar quality to OEM and may even use the same pins, meaning you could push out the wires out of the one you have now and stab them into the new one, so you wouldn't have to re-splice.

The place for all your motorcycle electric needs.

We make and sell only the highest quality products.

www.easternbeaver.com

Great source. I have used them before. Sumitumo is indeed one of the major electrical connector manufacturers for Toyota and the Yazaki wiring harness folks.

3P DS250 looks like the one that's needed:

Sumitomo DS 250 Connectors Raptor Stator