Correct V Belts-FJ40 1977 (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

See pics below. I bought this guy from an advanced auto 15 years ago. Let me know what you think on this

View attachment 2205758


That appears to indeed be a NipponDenso TOYOTA Alternator , its a Straight

Tab style ..........


you can take the WORLD CLASS part # 14540 and run it online to see whats

what with all that .............

it is very common place for aftermarket 3rd party re-builders to install wrong

pulleys , or sell a Angled TAB instead of a straight tab as u have there ......

one last observation , and moderate
RED FLAG , your 2 smaller wires that

enter the unit below the large white one with a blue tracer stripe ,

are not secured with a factory Electrical Connector like the one i will show below ,
you should address this very sooner rather then later .............fyi












 
Here is a OEM Toyota PArts Maker Yazaki brand
UV rated Alternator 3 pin profile connector and 3
Solid thick brass terminals you will need to do
The correction repair


605C7FCD-3E65-4117-9C69-38075568AF1E.jpeg
028D0DC3-52D2-498A-9F5B-69664A2CAFC9.jpeg
 
Here is a OEM Toyota PArts Maker Yazaki brand
UV rated Alternator 3 pin profile connector and 3
Solid thick brass terminals you will need to do
The correction repair


View attachment 2205816View attachment 2205817

I am not worried about the electrical, it’s the pulley I need dialed in. Will the factory pulley fit this alternator? I also need the JT outfitters PS pulley replaced with one I can run a 17mm belt on
 
I am not worried about the electrical, it’s the pulley I need dialed in. Will the factory pulley fit this alternator? I also need the JT outfitters PS pulley replaced with one I can run a 17mm belt on


YES , my pulley OEM Pulley will correctly fit this unit ,

if we are still unsure ?

pop it off and measure the ID of the pulley center hole .........
 
YES , my pulley OEM Pulley will correctly fit this unit ,

if we are still unsure ?

pop it off and measure the ID of the pulley center hole .........

Awesome. I will dm you and get your phone number and we can chat about the pulleys I need for alternator and PS pump.
 

Users who are viewing this thread

Back
Top Bottom