Coolant leak. Not sure what is wrong (1 Viewer)

[ToyotaMatt]

If for some reason you don't get Matt's package I think 5/8 inch heater hose sold at any auto parts store will work. They usually sell it by the foot at the parts store.

STOP the bad vibes ,

this is MUDSHIP at the CORE fundamental level

it will be there .,

read the express bubble mailer its guaranteed to arrive on time

this is the USPS

not fed ex or brown frown ground service !

+

this is only way i roll , advanced logistics

 

[Tweedledee]

Thanks for all the tips guys my fj62 is going to love the help and I appreciate it! A big thanks again to Matt got the assistance. I really can't say thank you enough!

 

[ToyotaMatt]

Scanned and accepted

Martin is in good hands with the USPS
Expresss !

 

[3_puppies]

I decided with all the effort to get martin home safe and FJ60 alive

i simply used these diagrams to conclude he could worst case need 6' feet and 6 oem gold cad double wire bayonet clamps ?

well ....................just in case

to encompass the entire oil cooler system in new epdm solid hose ..........


and qty x 8 new clamps too

because re-using old rusty land cruiser parts twice is simply so passe' .........






View attachment 2443921

Matt, a couple of those hoses have specific bends in them, I'm thinking bulk hose will kink. he could try, but don't cut the hoses with the bends just in case.
Paul

 

[ToyotaMatt]

Matt, a couple of those hoses have specific bends in them, I'm thinking bulk hose will kink. he could try, but don't cut the hoses with the bends just in case.
Paul

my tech recommend instructions were are clear ONLY use the long roll of hore in a emergegency to bypass the entire system

same with the 8 clamps

ONLY replace the straight leaking one for now

he is in your area like really close in the BUSH broke down,

i only want him to have every possible part in a worst case senerio

the Boy Scout in me i guess ..........

be prepared

i will remind him again

i know he is new to this L/C world you and i live in ...........

i have has back

thanks for your input paul as always , this is your area of expertise ........

 

[Tweedledee]

Diggin all the advice guys! Really looking forward to continuing this adventure. The help and knowledge you are passing along is invaluable!

 

[Tweedledee]

Wooohoooo!!! I have it in my hands and just finished working on the rig. All is in good order!

 

[Tweedledee]

I can't say thank you enough for all the help! Seriously. Without you guys I'd have been hosed... And yes that pun was quite intentional!

 

[Tweedledee]

Now I feel kinda bad. I got too into getting her fixed up and on the road to make sure nothing else was out of the ordinary. I took a few pictures of the after though

 

[Tweedledee]

Also I failed to mention. Not a single problem. The issue has been resolved!!! Thank you again. I couldn't have done it without all of you!