(Complete) Restored FJ40 2F Carburetor Accelerator Throttle Linkage Torque Rod Brackets Rods Kit (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

ToyotaMatt

Factory Focus-Point Mind-Set Approach
Supporting Vendor
GOLD Star
Joined
Aug 12, 2007
Threads
1,593
Messages
26,649
Location
EAST COAST
Website
vintageteqparts.com
Location
United States
IMG3 - Copy.jpg



Restored FJ40 2F Carburetor Accelerator Throttle Linkage Torque Rod Brackets Rods Kit Set Up



- From Gas Peddle to Carburetor

" Everything Circled in Red "

- ALL parts media blasted Then refinished

- All New Rubber bushings , grommets , Cushions , Hair pin , Collars , Ball & Socket spring Clips
&
10mm hex x 35mm Long
Mounting hardware to firewall

-
The rest is ALL New OEM Toyota Genuine parts

- Please refer to parts Diagram below


I have gas peddles available also


I have Orange Boots also available


Please Inquire Any questions


$475






Untitled - Copy.png
 
Last edited:
Matt would a ‘72 FJ55 Pig use a linkage like that as well or is it different? It currently has a 2F in it with a Weber but my friend is considering going More original. Thanks Tom
 
Matt would a ‘72 FJ55 Pig use a linkage like that as well or is it different? It currently has a 2F in it with a Weber but my friend is considering going More original. Thanks Tom


A FJ55 Uses Similar Parts as the 40 But indeed 55 specific ...

- a 2F would have used all linkage for sure , how ever a 1972 FJ55
originally , used linkage or a Cable type throttle i am Not sure on this fact?


- But , however i have Installed a late Model FJ55 on a 1974 FJ55 , and it

did require some tweerking , but was easy to update and upgrade at the end of the day

the biggest challenge was properly Locating the mounting spot for the

firewall Torque rod bracket .....


once i established that detail , the rest was plug and play .......

i hope this helps


just a fyi ,

i DO have ONLY 1 , complete 1/75-1980 FH55 specific Accelerator Linkage kit

in-stock , but only 1 for sure , and the 55 linkage parts and very difficult to find and source .........

it has taken me like 2+ years to gather all the correct needed parts ......

just a fyi on that topic



thanks matt
 
This Matt is the right guy for correct parts that work and fit.
I have owned many cruisers over the past 30 years and would look to Matt in a heart beat,,Thanks and good look find ing your parts Dave
 
A FJ55 Uses Similar Parts as the 40 But indeed 55 specific ...

- a 2F would have used all linkage for sure , how ever a 1972 FJ55
originally , used linkage or a Cable type throttle i am Not sure on this fact?


- But , however i have Installed a late Model FJ55 on a 1974 FJ55 , and it

did require some tweerking , but was easy to update and upgrade at the end of the day

the biggest challenge was properly Locating the mounting spot for the

firewall Torque rod bracket .....


once i established that detail , the rest was plug and play .......

i hope this helps


just a fyi ,

i DO have ONLY 1 , complete 1/75-1980 FH55 specific Accelerator Linkage kit

in-stock , but only 1 for sure , and the 55 linkage parts and very difficult to find and source .........

it has taken me like 2+ years to gather all the correct needed parts ......

just a fyi on that topic



thanks matt
Matt do you have the carburetor linkage to fit a 1974 FJ40. Everything from carb to pedal, does not take the cable.
Tom
 
Matt do you have the carburetor linkage to fit a 1974 FJ40. Everything from carb to pedal, does not take the cable.
Tom



YES ,

i do , Including Some Recently Acquired and Discovered Cache of NOS Push and Pull Rods to .............. :D
 
Matt do you have the carburetor linkage to fit a 1974 FJ40. Everything from carb to pedal, does not take the cable.
Tom



 
ToyotaMatt,

Do you have any of these linkage kits from the firewall to the carb? '75 SA FJ40 w/ non-smog factory carb.
 
ToyotaMatt,

Do you have any of these linkage kits from the firewall to the carb? '75 SA FJ40 w/ non-smog factory carb.


YES

i have More kits available '
'




DSCN3300 - Copy - Copy1.png
 

Users who are viewing this thread

Back
Top Bottom