- Thread starter
- #41
here it is
just about ready to run again
just about ready to run again
Colorado 77 Rolling Build (1 Viewer)
- Thread starter ColoradoCarlisle
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #42
working on coating the under carriage
- Thread starter
- #43
cleaned up the heater valve
a good over night soak in vinegar did the trick
before
a good over night soak in vinegar did the trick
before
- Thread starter
- #44
after
- Thread starter
- #45
i had this same bumper on my 73 and loved it
jt outfitters
not quite as stout as cool cruisers but it worked great before and i expect the same this time around
jt outfitters
not quite as stout as cool cruisers but it worked great before and i expect the same this time around
DSB345
SILVER Star
Looking good!
- Thread starter
- #48
Mastercoat® AG111 is the ultimate chassis paint. It does 14,000 hours of salt spray, is UV stable, and will not rust beyond a scratch! Compare that to KBS, POR-15, and the others. | Mastercoat® By PM Industries: Stop Rust Permanently & Get Rid Of the Pits!
wanted something with uv protectant and able to withstand what ever chemical colorado decides to use
wanted something with uv protectant and able to withstand what ever chemical colorado decides to use
- Thread starter
- #49
Been working on the 40
For those interested in swapping a 2f from a 60 series you need to keep all engine mounts
I didn't and this slowed me down
Engine is almost in waiting for one more mount
For those interested in swapping a 2f from a 60 series you need to keep all engine mounts
I didn't and this slowed me down
Engine is almost in waiting for one more mount
- Thread starter
- #50
Engine almost in
Ran into an issue you have to keep all mounts when doing a swap from a 60 series
I didn't so had to get those back as well as the bell house from a fj40
Ran into an issue you have to keep all mounts when doing a swap from a 60 series
I didn't so had to get those back as well as the bell house from a fj40
- Thread starter
- #51
Doing some beginner stich welding to get rid of the rust
It will get new fenders and new quarter panels soon
It will get new fenders and new quarter panels soon
- Thread starter
- #52
Next I need to finish more welds and tackle this
- Thread starter
- #53
Went to classic cruisers in salida co last week with my dad
Had a great time
This was my bestbfriends rig when we were in collage
It was a prestine 79 all stock
He wrapped it around a tree after too many barley pops
He was OK it was totaled
I took a couple parts off of it for my truck
We went skiing in this100s of times,camped wheeled just had a blast
Even took it to moab several times
We did kane creek in this
Cool truck great memories
Had a great time
This was my bestbfriends rig when we were in collage
It was a prestine 79 all stock
He wrapped it around a tree after too many barley pops
He was OK it was totaled
I took a couple parts off of it for my truck
We went skiing in this100s of times,camped wheeled just had a blast
Even took it to moab several times
We did kane creek in this
Cool truck great memories
- Thread starter
- #54
My son who loves helping
We are so excited for cruise moab this year
We have two times in a 80 series and one in our current 100 but goal is to get this one out there this year
We are having an blast
We are so excited for cruise moab this year
We have two times in a 80 series and one in our current 100 but goal is to get this one out there this year
We are having an blast
- Thread starter
- #55
Pleasantly surprised to see a newer clutch apparently installed by classic cruisers in around 2011
Here is the 60 the engine came out of
Here is the 60 the engine came out of
Looking good. I like the direction you're heading with resto/mod.
Gawd that heater was hairy.....
Gawd that heater was hairy.....
