Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Anybody have Coastal Offroad kit sliders on their LX470 with AHC ? I think this slider set is not using U bolt and you have to weld this directly to the chasis ? If so I dont think it will be compatible with AHC ?
They are made to weld onto the frame.
I would suggest that if you are able to weld a slider kit together you shouldn't have much trouble adding a plate with holes to make them bolt-on. You can get square u-bolts from a variety of places including Metaltech or McMaster-Carr. You could also put a plate on each side of the frame and use simple bolts from anywhere.
yes, that is a great idea and with my current AHC setup, I doubt I can use all the 3 feet. I know that everybody uses 3 munting feet/points for non AHC vehicle and 2 for AHC. I wonder if there's any compromise in flex and strength on 3 vs 2. I bet the non AHC 3 feet sliders will be more robust and rigid.