Coal Mine Cruiser Classic Swap Meet (1 Viewer)

[woytovich]

This thread is intended for people that are coming to CMCC in July to post up their FOR SALE and/or WANTED items list.

The goal is to facilitate the exchange of items while avoiding shipping.

(Of course feel free to bring stuff to the event to lay out for people to buy but if you all can pre-arrange a sale through this thread all the better!)

Please post your items FOR SALE and/or WANTED here but use PMs or emails to work out the details. Edit your posting here once things are taken care of...

Mark
GCLC Membership Director

 

[BirdManzFJ]

I have a set of TG's Tube Doors, NEW, powdercoated matt Blk, w/hardware. Fits 84-88 truck, 84-89 RnR.

 

[GLTHFJ60]

I have a bunch of 2F components to sell. Oil pickup, various brackets and a FZJ80 rear axle housing (complete minus diff and axle shafts) that's been converted to leafs:

https://forum.ih8mud.com/sale-parts...xle-2f-headers-exhaust-np203-other-stuff.html

 

[woytovich]

WANTED TO BUY:

-Late FJ40 rear axle WITH parking brake

-FJ45LV or VERY early FJ40 split hood WITHOUT windshield pads and latches - no rot or dents please

-FJ45LV rear bench seat

mark

 

[jonheld]

If there is a white 80 Series parked close to mine, I will be doing a body swap in the middle of the night.

 

[GLTHFJ60]

Going along these lines, I can carry some parts with me from NC up to PA for CMCC if anyone needs to mudship. I'll be taking 95 to DC, then 15 through PA to I-81.

 

[triskelion]

Tundra steel wheels

18 inch 5 spoke

4 with tires 200.00

3 just wheels 40.00 each

Mix and match to make a set

Tires have 70% left

 

[woytovich]

See the FS thread here on mud:

SOR FJ60 Camo "Hat" car cover

$50 in person delivery at CMCC

Mark

 

[hman913]

For sale...

Flywheel cover for 4-spd bellhousing - $5
(2) 2F air cleaners - $10/each
SM465 transmission (2wd version) - $50
FJ40 fuel sender - $10
FJ40 tail light - $5
FJ40 driveshafts - $20/each
Front turn signals - $15/pair
FJ40 front crossmember - $20


Pictures available upon request.


Want to buy...

'75-'78 FJ40 steering column
'75-'78 hood aprons

 

[woytovich]

FOR SALE

FJ40 rear upper hatch. Original paint, some rust in lower corners (see pics, worst corner shown - still structurally solid), inner and outer handle work properly, glass is good.

Free VINTAGE WBAB sticker included at NO EXTRA CHARGE!

$99.99

 

[woytovich]

FOR FREE

Warn M12k roller fairlead for parts or repair
The fairlead from my M12k Warn. Lost one of the small rollers. Either replace that roller or use parts from this one to repair yours.

Free for nuthin'

 

[shmukster]

Parts for Coal Mine

I have a trailer behind my house with some bigger items in it...........will go from memory here to describe. I can bring any of these items to Coal Mine as long as they're prepaid. If someone is seriously interested send me an email shmukter@pa.metrocast.net and I can open up the trailer and take some shots. Here goes:

FJ40 fenders- never used, some surface rust but good shape either fender $75 or both for $110

FJ40 fenders- used but not bad $60 the pair

FJ40 fenders some rust not as good as the previous set $50 the pair

FJ40 hood- no rust good shape $60

FJ40 one piece upper tail hatch- red- nice shape $50

Side and door glass for FJ40 and 55 series maybe some 60 stuff $14 per piece

FJ40 long jump seats good shape nice upholstery $75 the pair

FJ40 rad support (the U-shaped piece) $35

FJ40 bibs decent shape have several $30 each

FJ40 aprons have several in good shape $30 per pair

Conferr black headlight and grille surround good shape some of the black finish coming loose $50

Driveshafts- FJ60, FJ62, FJ55, and FJ40 fronts and rears $30 each let me know what you need

Pair of original white wheels from an 82 FJ450 some rust $50 the pair

Split transfer case from an 84 FJ60 excellent shape shifter included $95

Overhead console from a 40, fits under the front of the fiberglass roof decent shape $30

Have several under dash heater assemblies for various years FJ40 $50 each

Gray FJ60 dash pad nice shape $60

FJ40 windshield frames- various years none perfect but all usable $35 each

FJ60/62 protector for the front of the hood- plastic nice shape $20

FJ60 brown console good shape $30

FJ60 radiator excellent shape $75

79FJ55 radiator needs very little solder job $50

FJ60 and 62 steering wheels brown or gray take your pick nice shape $40 each

FJ40 or FJ60 rear axle shafts- left or right $25 each

FJ40 4.10 third members $95 each FJ60 3.70 thirds $65 each

FJ60, FJ62, FJ80 or FJ55 instrument clusters $35 each

 

[hman913]

Pm'd you Gary.

 

[woytovich]

FOR SALE

TEQ Grille badges ON SALE

Regularly selling for $54.50 I will sell for $40 to CMCC REGISTERED DRIVERS ONLY - limit of ONE (1) badge per driver only, to be hand delivered at CMCC 2013. This must be pre-paid via paypal as a GIFT (so I can avoid the fees) OR hand me cash at CMCC. Email me directly for either of these options: mark@woytovich.com

There are only 10 badges available at this price. Deadline for ordering is July 1st.

Here is the mud thread regarding the badges:

https://forum.ih8mud.com/merchandise-storefront/611873-teq-grille-badges.html

Mark

 

[triskelion]

Mark I'll take a badge cod at cmcc

 

[dr_dobro]

Chris, got your requests.....

As usual, didn't read all the way, notice that Gary got you covered. Sorry though.

D.

 

[woytovich]

mark i'll take a badge cod at cmcc

please email me your name and order...

 

[Stumpalama]

I have a brand new, in the box Ironman 9500 Monster winch. It is waterproof and wireless.
Link to the winch with specs: http://www.sierraexpeditions.com/index.php?l=product_detail&p=4656

Asking $475 delivered to CMCC!

PM me if interested.

 

[dr_dobro]

My list:

2 brand new 9.5 diffs ( fine spline) stuffed with Yukon gears 4:56, along with the instalation kit and ARB air lockers and universal bolt pattern flange. Members are powder coated, no switches ir compressor. And all set up by a professional shop. $1800

2 FJ 40 OEM rill cages in excellent shape,
- 1977 back cage $100
- 1979. Grey cage $150

Fj40 restored roof top with new gutters and painted ( no liner) $1,000

Fj40 1979 side panels in excellent shape $200 for the pair

Fj40 ambulance door shell in good shape $ 200 for the pair

Fj40 hatch in excellent shape, no rust , with glass and hardware $ 300

Fj40 1975 front doors, restored, complete with new bottoms and new OEM gaskets all around. $700. Beautiful condition .

1978 fj40 frame from CA with 0 rust, not pitted and black coated, rare for it's condition ( been stored in the east coast for over 20 years) $1,500


60, 62 and 40 front axle housings. $50 each. ( bare housings) all in excellent shape.

48" foldable scaffolds with platforms $50 each

Huge 12" dewalt sliding miter saw $200. Load spring needs to be changed.

3 hp plunge routers $100 each. These are the heavy duty ones. All in good shape

Daniel.

 

[GLTHFJ60]

Huge 12" dewalt sliding miter saw $200. Load spring needs to be changed.

Daniel.

Very interested. Have a model # for me?