clutch slave (1 Viewer)

[Spore]

Hi all-

Does anyone know if the clutch slave from a '81 FJ would work on a BJ of the same year?

If anyone knows off the top of their head, I'd appreciate it before pulling and comparing, just to find out I'm screwed!

Cheers!

 

[Jan-78FJ40]

Hi all-

Does anyone know if the clutch slave from a '81 FJ would work on a BJ of the same year?

If anyone knows off the top of their head, I'd appreciate it before pulling and comparing, just to find out I'm screwed!

Cheers!

would not work.
cheers,
j

 

[Spore]

thanks j!

 

[Jan-78FJ40]

thanks j!

sorry I was so brief, I was in a hurry. the BJ cylinder has a very different angle for the inlet of the pressure hose, but that could be overcome, as the threads are the same. the real problem is that the cylinder is shorter, the bolt holes are closer together, and the push rod is shorter too, with a little less travel. so it would not work.
also, for the 3B engines there are 2 types of cylinders, make sure you get the correct one. there should be a part number on it.

cheers,
Jan

 

[Radd Cruisers]

I have these cylinders in stock if you're interested.



~John