Clutch Master Blank Off Plate

Joined
Aug 30, 2020
Messages
14
Location
Colorado
Hi All - I'm getting lazy in my old age. I could easily make one but before I go to the effort wondering if any vendors make a clutch master blank off plate. I have a 77 FJ with a RAMJET 350 and TH350. It's getting cold here in CO and the cold air from the clutch master hole blowing into the onto my crotch is a bit un corfortable. Do you know of anyone that makes a blank off plate for that hole in the fire wall where the clutch master went?
 

ToyotaMatt

Factory Focus-Point Mind-Set Approach
Supporting Vendor
GOLD Star
Joined
Aug 12, 2007
Messages
23,423
Location
EAST COAST
Website
vintageteqparts.com
NO ,

nobody makes that type of delete plate because its not a common need

however , you can make your own EAZY PEEZY


- purchase a NICE NEW OEM unit ,

- ALL new oem mounting hardware too

- prior to install , remove the push ROD via The snap ring under CUP BOOT

- re-install CUP boot

- atttach new master to firewall ,

- now your done and have a OEM PHO- DELETE Plug Master Period correct

- it will BOTH FIT and FORM without the function

- now your ...........................will remain warm And cozy



1639050190697.png
_






@3_puppies
 

ToyotaMatt

Factory Focus-Point Mind-Set Approach
Supporting Vendor
GOLD Star
Joined
Aug 12, 2007
Messages
23,423
Location
EAST COAST
Website
vintageteqparts.com
thanks. I should have thought about that when the pile of old stuff was laying around the shop floor <lol>


well im a thinker ............... :D


and this is the approach i would personally take and path i would choose 110% ..........

i would not blink twice at spending $34-=38 on a BLUE AISIN Proper profile NEW Clutch Master cylinder


see MICE can chew thu tape and go thu a hole the size of a DIME


don't risk in brother






s-l1600111111 - Copy - Copy (3).jpg
 

65swb45

Elder Statesman
Supporting Vendor
Joined
Apr 14, 2004
Messages
33,512
Location
818-953-9230
Website
www.marksoffroad.net
If I had 3 threaded, unused holes on my firewall, especially in a space as large as that enjoyed by the clutch master, I would build something more useful than just a blockoff plate. A bracket to hold a spare bottle of oil, a accessory tool mount for routine maintenance tools, etc.

You could have fun and sponsor a contest in the 40 section to get more creative ideas. Cruiser owners like contests and free stuff.😉
 

65swb45

Elder Statesman
Supporting Vendor
Joined
Apr 14, 2004
Messages
33,512
Location
818-953-9230
Website
www.marksoffroad.net

Users who are viewing this thread

Top Bottom