i just got done soaking my sliding windows in spray silicone grease overnight. then forcing them open. then lots of windex and q tips and paper towels and an old green brillo pad to scrub all the crap out from the rails.
then i applied some of this honda silicon product to the gaskets and now i am going lube the rails with some silicone spray lube again.
anyway i made these screens awhile back and i realized i could probably make a DIY template for them. not sure if anyone is interested or has constructive comments. i figure i could supply CAD, locate the magnets, supply a grainger part number for the magnets.
i may go as far as trying to find out if i can cut them and let someone DIY the magnets themselves. or maybe just release the CAD i suppose.
anyway some pics.
then i applied some of this honda silicon product to the gaskets and now i am going lube the rails with some silicone spray lube again.
anyway i made these screens awhile back and i realized i could probably make a DIY template for them. not sure if anyone is interested or has constructive comments. i figure i could supply CAD, locate the magnets, supply a grainger part number for the magnets.
i may go as far as trying to find out if i can cut them and let someone DIY the magnets themselves. or maybe just release the CAD i suppose.
anyway some pics.