The LC interior design fits me well except where I put my right leg. It tends to rest against the shifter, and occasionally pops the O/D button out.
so I created a cheap leg rest using a empty Gatorade bottle.
Take an empty Gatorade (or other plastic bottle with ridges) cut the top and bottom off, and run a cut down the length of the cylinder.
Work the plastic ring under the center console:
Then put another bottle that is closed inside loop to support your leg.
I gained enough clearance not to be putting weight on the shifter. However, I've been keeping an eye out for larger bottle, to gain some more.
so I created a cheap leg rest using a empty Gatorade bottle.
Take an empty Gatorade (or other plastic bottle with ridges) cut the top and bottom off, and run a cut down the length of the cylinder.
Work the plastic ring under the center console:
Then put another bottle that is closed inside loop to support your leg.
I gained enough clearance not to be putting weight on the shifter. However, I've been keeping an eye out for larger bottle, to gain some more.
Last edited:
