chasing lead that goes into the back of coil (not the one that goes to dizzy) (1 Viewer)

[nudibranches]

Hi all,

Long time lurker, first time poster, I have a 97 1FZ FE at 400,000km and am doing some preventative maintenance. As per the pics below, I’m chasing the lead that goes into the back of the coil, that I’m touching in the first pic, second pic is the plug for this cable.

As per the attached schematic, it only lists the lead/plug from the dizzy - 19901A, which I have replaced and is fine - but I can't find anything (part number etc) that matches the lead/cable that goes into the back of the coil.


Many thanks.



Adrian

 

[jonheld]

The connector you're holding is 90980−11246, but that is the connector housing only. The other end goes to connector EA2, pins 1 and 8.
There is no "replacement part" for this harness. You will have to make your own.

 

[nudibranches]

The connector you're holding is 90980−11246, but that is the connector housing only. The other end goes to connector EA2, pins 1 and 8.
There is no "replacement part" for this harness. You will have to make your own.

View attachment 3312802

View attachment 3312806


View attachment 3312808

Thanks.