While checking my timing and completing the lean drop idle settings this evening I found something the PO did. The Return line from the fuel pump to the tank had a hose clamp tightened all the way down on it behind the A/C compressor. It was hidden in the foam insulators for the fuel lines. I also found the rubber line from the EVAP canister to the tank pulled off of the metal line that runs down the frame
Any guesses what the P.O. had in mind?
I reconnected the line from the EVAP canister to the frame line and took the hose clamp off. I will have to replace the fuel line tomorrow as it has a constricted place where the clamp was.
I will add it was bone stock with all of the smog equipment in place when I bought it.
Any guesses what the P.O. had in mind?
I reconnected the line from the EVAP canister to the frame line and took the hose clamp off. I will have to replace the fuel line tomorrow as it has a constricted place where the clamp was.
I will add it was bone stock with all of the smog equipment in place when I bought it.