Can I fit a later style 40 tcase knob on my 1/75? (1 Viewer)

[alex e]

I like this knob and wonder if it will fit my t-case shifter? Anyone have an inside diameter or thread pitch for these things. I bet you could adapt it............

 

[Fuzzy Logic]

Helicoil it

 

[Degnol]

Is that from a '60? I think the thread size is larger, but you can make anything work!

Ed

 

[JJS]

I don't think the thread pitch is any different. I used a knob from a mid-80's Nissan pickup on mine.

 

[Degnol]

I think the whole shifter is bigger in diameter on a FJ60.

 

[JJS]

I think the whole shifter is bigger in diameter on a FJ60.

I might have one of those around. I'll take a look to see if it will fit.

 

[shelfboy1]

if its from a 60 it wont fit to big fill it full of epoxy or 1 of the 2 part metal fillers the drill and tap it to size .or not the best way but weld the top half of a 60 shifter to your 40 and screw it on good luck

 

[AATLAS1X]

OR you can use a late model 40 lever that takes the lager knob, yes the 40 and 60 are the same knob from 81 and up.

 

[AATLAS1X]

Like this?