Broken Sway Bar Linkage - what part?? (1 Viewer)

[brownriggj]

Hi All,

I've got a broken sway bar linkage and my mechanic says the stock toyota part doesn't fit. I've got an OME 3" lift in there done by the PO, so was hoping you all could help me figure out what I need to order. Picture attached. Thanks!

 

[Ronny Grady]

80/100 Series Heavy Duty Rear Extended Swaybar Links

80/100 Series Heavy Duty Rear Extended Swaybar Links (SBL-1)

absolute-wits-end.com

 

[ChargedSHOTaco]

Step up to these instead.

Severe Duty Rear Sway Bar Links - Land Cruiser Products - LCP

Land Cruiser Products Land Cruiser Parts

sites.google.com

 

[Rusty Marlin]

It looks like you lost the bushing and its washer, so you could just replace those, but depending on how much rust is on the threads it might be worth the saving the aggravation and just get a new set of links.

 

[jfz80]

He may also have been ordering/looking at wrong year.
IIRC 91-2 and 97 had that pin style that attached to bottom of frame And 93-95 had the side of the frame sway bar attachments.

 

[Rusty Marlin]

You are also missing your bump stop. Its rotted off.
When you raise the vehicle, you "should" lower the bump stops too.
I put a 2x2 square tube under my bump stops. Made a couple of support tubes for the through bolts from steel water pipe. (prevents the tube from crushing)

 

[LandCruiserPhil]

Step up to these instead.

Severe Duty Rear Sway Bar Links - Land Cruiser Products - LCP

Land Cruiser Products Land Cruiser Parts

sites.google.com

Good idea
Fitment for all 80 series

 

[brownriggj]

Wow you guys are great. I grabbed the wits end links and I'll get on it with the bump stop. Thanks!