when i brake it pulls to the left very hard... the harder i brake the more it pulls to the left. this was going on for like 2 weeks and i knew my left front brake caliper was leaking fluid so i thought the right one was doing all the work. however i replaced both my calipers up front with 4runner calipers (which are huge!) and 60 dollar bendix brake pads....i go for a test drive today and its still pulling...
there might still be a little air in the system but im certian that its pulling up front and not in the rear (rear has GM disc brakes)... everything on the truck is practically new...and the front axle has all new seals/bearings
and i'm running 37inch mtrs to... with stock master cylinder
could there be anything binding up inside the front axle causing it to pull (screwed up spider gears?)
really need your help on this one guys..
there might still be a little air in the system but im certian that its pulling up front and not in the rear (rear has GM disc brakes)... everything on the truck is practically new...and the front axle has all new seals/bearings
and i'm running 37inch mtrs to... with stock master cylinder
could there be anything binding up inside the front axle causing it to pull (screwed up spider gears?)
really need your help on this one guys..