Brake Inquiry (1 Viewer)

[74bigred]

Looking for input Guys.
I recently put new wheel cylinders & shoes on the front of my 74. Bled the line. When driving, I have a pronounced pull to the right when applying my brakes. Especially at speeds over 30. Brake hoses are newish.
Hoping for the easy fix , I adjusted the shoes on both fronts. Did not change a thing.
I know that it’s not alignment, Drives straight with hands off wheel and no brakes applied.
I assume it may be fluid pressure that is off in a Brake line? Again it only pulls when I apply brake pressure.
I welcome & appreciate any input from this knowledgeable forum. Thanks in advance!

 

[Mr. Green]

Too loose in left or too tight in right. Adjust and retest.

 

[B y r o n]

If it is pulling to one side then the adjustment is tighter on that side. Try backing off the adjustment slightly and see if the problem still exists.

 

[74bigred]

Too loose in left or too tight in right. Adjust and retest.

Ok I’ll give it a shot
Thx

 

[Mr. Green]

Adjust left to have similar drag as right free wheeling then road test. I think adjusting shoe/cylinder is the same. This is all Assuming also you have cylinders in correct location/orientation of course.