My master cylinder is shot, and I think it's leaking fluid into the booster. I'll know once I actually pull the master off, but if that is the case, would that render my booster kaput also or is it still serviceable?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
they might have done fine with the clevis bottomed out on the pedal rod,
I don't think this adjustment affects the pushrod to master cylinder distance. (If this is wrong someone correct me). The clevis/pedal rod adjustment may need to be done after a brake booster swap for proper contact with the brake light switch.