Was changing my wheel bearing out the other day and came across a couple rust holes in the inner spindle dust seal. I originally thought this was the dust cover (part #s below). Turns out the part I actually needed was separate and is the inner dust seal. Had a hard time finding all the part numbers needed so here is a list of everything.
Brake dust cover (large part you see easily that is between the rotor and knuckle)
Driver 47782-60110
Passenger 47781-60110
9031399001- Inner Dust Seal (on the outside of the larger dust cover and seals the gap between the spindle/hub)
4343660020 - Knuckle Spindle Dust Cover Gasket (this goes in between the larger dust cover and inner seal)
9008011370 - Bolts x4 that hold the dust cover/seal onto the knuckle.
All parts are interchangeable between sides except for the larger dust covers.
Brake dust cover (large part you see easily that is between the rotor and knuckle)
Driver 47782-60110
Passenger 47781-60110
9031399001- Inner Dust Seal (on the outside of the larger dust cover and seals the gap between the spindle/hub)
4343660020 - Knuckle Spindle Dust Cover Gasket (this goes in between the larger dust cover and inner seal)
9008011370 - Bolts x4 that hold the dust cover/seal onto the knuckle.
All parts are interchangeable between sides except for the larger dust covers.