Body Mount kits? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 7, 2006
Threads
74
Messages
1,104
Location
Denver, CO
Does any one make replacement bushings for the 60 series in a kit??

Man a Fre has a Kit for the 40's and 55's of course......

and SOR has them individually, but i like my arm and leg.
 
Cool. Thanks.

Mine are all cracked and falling apart.
 
Another Question, can these be replaced without taking the body off??
 
Another Question, can these be replaced without taking the body off??


Yes. There was instructions at 4crawler.com when I bought mine. Basically you loosen all the bolts and removed all the nuts on one side then jack the body up slowly on that side and replace them all. Then repeat on the other side.
 
Excellent....
 
Spray some PB blaster or Penetrating Oil on all the nuts first and let it sit. Some of the bolts can be a pain to loosen if you got a lot of rust. Also remember to check your fan shroud after doing the lift for clearance.
 
Don't want to lift it. Im just getting new bushings - stock height.
 

Users who are viewing this thread

Back
Top Bottom