body mount kits for fj60

Joined
May 26, 2003
Messages
7
???where did you find a body lift for your 60? i've thought of making one, but haven't found any articles on any good or bad points. i made 2" blocks for my zuk and thought about making more and just going for it with the 60. dunno. . . i saw a set on the tlc site.
http://www.tlc4x4.com/2000/Parts/tlc_body_mount_kits.htm

hope that helps!

jon
'83 fj60
'88.5 suzuki sj413
 
Joined
Oct 12, 2004
Messages
3,080
Bump to a very old thread!!

I am looking at doing a frame swap on my 60 ,and I am sure that all of the bolts will snap and break while attempting to be removed ( and I would not want to reuse them anyway). As well as the rubber mounts themselves are basically dry rotted, cracked and old.
So what I am looking to purchase is every part needed to swap frames. I guess that would be bolts, nuts, washers, and the actual rubber mounts? Am I missing anything? I would like to purchase this as a kit, does one exist? What can I get OEM from Toyota? I would like to make it as stock as possible. If no kit is available, how many of each part would I need? Does a better aftermarket option exist?


Thanks,
Zack
 
Joined
Oct 12, 2004
Messages
3,080
It seems that they sell numerous brands.....Are they FJ-60 specific parts,or are they generic? IS one brand better than the others?


Thanks,
Zack
 
Joined
Oct 12, 2004
Messages
3,080
whew....I spent some time on the 4crawler site today, and my head is spinning with the number of combos and options available!! If I am reading the site correctly, there is no common body mount sizes for the FJ-60, in that it seems that most FJ-60's are different?? SO.....out of the twelve mounts, you can't be really sure how many small, med, and large mounts you need? He sells a mixed kit that "should" cover all the bases? I wish Toyota sold a combo pack mount kit!


Zack
 

rover67

SILVER Star
Joined
Sep 5, 2006
Messages
1,381
Location
Boulder, Co
yeah, just measure what you have and go from there.
 

GLTHFJ60

Rum Runnin'
SILVER Star
Joined
Apr 18, 2005
Messages
28,513
Location
Durham, NC
X3 Measure the mounts on your new frame and go from there. I also had 2 small, 6 medium and 4 large for the 62 frame I'm using.
 
Joined
Oct 12, 2004
Messages
3,080
Ok I will look under my truck and measure them. It just seems odd that Toyota would not have specifics for this.


Zack
 

Users who are viewing this thread

Top Bottom