BJ/FJ 60 Wiring

Joined
Jan 25, 2008
Messages
672
Location
Birmingham, Alabama
Website
www.trucksplusinc.com
Can anyone direct me to a good thread or web page with detailed wiring diagrams to assist with a 3B install in a FJ60. Have a complete wiring harness from a BJ60, just need a little help.

:bang:
 
Joined
Jan 20, 2003
Messages
11,220
Location
Wherever the truck stops!!
Website
wirrell.com
Pull the dash and the dash/firewall harness and install the 3B harness, dash and relays. The rear harness doesn't change as far as I know.
 
Joined
Jan 25, 2008
Messages
672
Location
Birmingham, Alabama
Website
www.trucksplusinc.com
So remove all the wiring in the truck and replace with BJ harness??? No need to integrate the two in any way I assume? Thanks for the help.
 
Joined
Jan 20, 2003
Messages
11,220
Location
Wherever the truck stops!!
Website
wirrell.com
Yes, the one should completely replace the other, no need to integrate the two. You WILL need ALL the BJ dash and relays as there are differences in the dash and idiot lights as well as the tach. The A/C control is also different though the wiring harness is the same or at least usable.
 
Joined
Jan 25, 2008
Messages
672
Location
Birmingham, Alabama
Website
www.trucksplusinc.com
I have a BJ dash cluster but no other dash parts. I have the dash out, how do I get the wiring harness from behind the defrost air tube. Looks like a lot of unbolting to remove?? Any other areas of concern I should know about?? THanks.
 

Users who are viewing this thread

Top Bottom