BJ 74 exhaust pipe Aftermarket source N. America? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I thought I saw at least the flange that bolts to the turbo somewhere on MUD.
I am sure it was not a Toyota part but rather the starting point for a custom exhaust.
It could have been a flange that would bolt to the cast iron deal right off the turbo though.

Edit: I saw that flange after googling CT26 turbo flange. I briefly thought of doing custom exhaust all the way from turbo.
pics
 
Last edited:
My bad. I think @hotgemini might be right.

I listed the PN for the main exhaust pipe with flange. Not the 90* directly off the turbo...
Yes that's the part I need. Mine has broken between the flex section and the lower flange.
With that part number my local Toyota dealer can order it. Thanks for your help.
 
I know you norte americanos are much bigger on keeping everything OE than most of us here in the land of bountiful 70 series cruisers, but down here I'd be replacing everything with a custom 3" mandrel bent exhaust. In fact in most cases we'd remove the cast elbow and make a custom dump pipe straight from the rear flange of the turbo.
 

Users who are viewing this thread

Back
Top Bottom