I'm installing Bilstein 1477 and 1478's...at least thats the plan. So far, I'm om the front. I'm having difficulty figuring out the bushings and the washers for the install. I'm following Slee's write-up and the instructions that came with the shocks, but when I put the washers and bushings on, per the Bilstein instructions (which do coincide with Slee's instructions) there is not enough room on the post to work with. Also, both top and bottom mounts have one bushing larger than the other, but the instruction's illustrations do not show a difference, does the smaller or bigger one go closest to the shock? And finally (for now), the bushings for the bottom mounts do not slide over the post, the hole is to narrow for the post. Has anyone had these problems?
Thanks in advance for any help,
Perk
Thanks in advance for any help,
Perk