Basic wheel fitment question (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 25, 2020
Threads
8
Messages
30
Location
CT
Does anyone know if this would fit our FZJ80?


My alloys are corroded and I tried sanding them down, but it’s hard to smooth them out to a mirror like finish that I’ve seen with other members, so am thinking of replacing them altogether.



Thanks, Rick
 
Here’s some compiled info.


1997 FZJ 80
Bolt pattern 6 x 5.5”, 6 x 139.7mm
Stock backspacing is 4.5”
Stock Offset is 0”
Center bore is 106mm
PCD is 139.7 (stud)
Stock is 16”x 8” with Offset of 0mm


10” is 50mm wider so a -25mm offset would put the back edge of the wheel in the same place.

17”x 9” with -12mm offset puts the tire at the edge of the flare. 3.5” backspace?

Torque sequence 1, 6, 4, 2, 5, 3
76 lb-ft (75 to 85 lb-ft)
7 turns minimum

Black Rhino
Apache
Dugger
Sidewinder

American Racing
AR202
Matte Bronze Black lip
17x9 -12 offset


KMC Wheels
KM542 Impact
17x9. -12 offset
Satin black machined

Fuel offroad
Vector model D601
Anthracite

Toyota Tundra rims
2003 - -2007
Only 7.5” wide

17x8.5 Icon Rebound
 
Does anyone know if this would fit our FZJ80?


My alloys are corroded and I tried sanding them down, but it’s hard to smooth them out to a mirror like finish that I’ve seen with other members, so am thinking of replacing them altogether.



Thanks, Rick
No. They are 15" rims. Your brake calipers on an FZJ80 (1993-1997) will interfere with the wheel.
 

Users who are viewing this thread

Back
Top Bottom