Buenas tardes. Soy completamente nuevo aqui. Soy de venezuela y necesito ayuda para la instalacikn de un air locker arb ckma12 de diferencial
Ayuda por favor. Instalar compresor arb (1 Viewer)
- Thread starter Elnegro2803
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hola, necesitará un cable bastante pesado para ejecutar el compresor arb ckma12. Muchos usan cables de soldadura ya que son muy flexibles.
¿Cuántos amperios extrae y qué tan lejos de la batería la está montando? Use una calculadora de calibre de cable para determinar el tamaño de los cables necesarios.
¿Planea usar los interruptores ARB para ejecutar los casilleros diferenciales?
Hi, you will need fairly heavy wire to run the arb ckma12 compressor. Many use welding cable as its very flexible.
How many amperes does it draw and how far away from the battery are you mounting it. Use a wire gage calculator to detirmain the size wires needed.
Are you planning on using the ARB switches to run the differential lockers?
Google Translate to the rescue....I hope.
¿Cuántos amperios extrae y qué tan lejos de la batería la está montando? Use una calculadora de calibre de cable para determinar el tamaño de los cables necesarios.
¿Planea usar los interruptores ARB para ejecutar los casilleros diferenciales?
Hi, you will need fairly heavy wire to run the arb ckma12 compressor. Many use welding cable as its very flexible.
How many amperes does it draw and how far away from the battery are you mounting it. Use a wire gage calculator to detirmain the size wires needed.
Are you planning on using the ARB switches to run the differential lockers?
Google Translate to the rescue....I hope.
FZJ80 ARB rear AirLocker home install write-up. (no re-gearing)
Hello world! So I've kind of been working on my 80 for a few years now and finally decided I wanted to add lockers. My truck was factory unlocked and I had actually purchased a front and rear ARB setup 2 years ago, but I've been too chicken to dive into doing the install myself. My 80 is...
forum.ih8mud.com
- Thread starter
- #4
Tengo el cableado original que trago el compresor. Pero tengo dudas sobre poner a funcionar luces en el tablero. Bloque de frente
Bl
Bl
Harrop E-Locker using OEM Switch and Dash Lights in a HDJ81 / FJ80
I decided to put this thread together for anybody wanting to wire Harrop E-Lockers into an HDJ81 or FJ80 using the OEM locker switch and locker dash lights. I found most of the info spread out over a couple of other 'Harrop" threads and wanted to put it all together in one place and add some...
forum.ih8mud.com
El proceso será muy similar al hilo anterior. En lugar de activar los casilleros electrónicos, se activan los selonoides neumáticos. El cableado de las luces del tablero será el mismo o muy similar.
The process will be very similar to the above thread. Instead of triggering the e-lockers, you trigger the pneumatic solenoids. the wiring for the dash lights will be the same or very similar.
