Ok so I spent about an hour sifting thru the fittings at napa with no luck. Thought I found something but the threads are to big... anyhow found that out after removing the original breather. Going to see about tracking down the "union" #9040451026 at the dealership and if not Ill just stick a tube on the old breather.
I did notice when I was under the truck this morning that at some time I did get water in at least the front axel. Some evidence on the knuckles and in the breather itself.
Question is whats the best way to flush the system?
Figure ill pull the diff housing but not sure how to get the gunk completely out of the system.
Peace
Neal
I did notice when I was under the truck this morning that at some time I did get water in at least the front axel. Some evidence on the knuckles and in the breather itself.
Question is whats the best way to flush the system?
Figure ill pull the diff housing but not sure how to get the gunk completely out of the system.
Peace
Neal